PRESS2010_EN

209/1208

P−2×HCC≧0.2P−2×HCC≧0.2＋d1（ejector punch）P−2×HRC≧0.2P−2×HRC≧0.2＋d1（ejector punch）M／2＋1≦VUC・VSC（M is the screw hole diameter for tapped・ejector tapped type.）　0、or remain the same as VKC・VKCM・VKCZ・VNCM・VNCZ）M／2＋1≦HHC・HMC（M is the screw hole diameter of tapped・ejector tapped type.）CNCmnl5. HP1CUVCUVCSV●Alter 4 corners of the shank to C0.5 chamfering.4ーC0.5●Alter 1 corner of the shank to C1.0 chamfering.WVWH●Chamfer on the bottom of block punch.Range of designation0.3≦CTC≦1.5●Alter V dimension according to designated （VUC）・（VSC）.Range of designationP／2＋0.02≦VUC・VSC＜V／2●Alter V dimension according to designated（HHC）・（HMC）.Range of designationP／2＋0.02≦HHC・HMC＜H／2 Shape AlterationsehcnuP kcoBVPVPCode@/PCC（200）The distance between the shank corner and the blade must be 0.5mm or more.For blanks, chamfer on the overall length L.Straight type is not available.CNC（400）●For straight block punches, alter 4 corners of the shank to C0.5 chamfering.Range of designation5≦CNC≦LUnit of designation 1Tip shape D is available only.CCP（200）The positioning between chamfering part and tip…m＋n≧1.3　　Designated chamfering position.CCP90CCP180CCP270General・tapped type are available.HVC（200）●Tip（P・W dimensions）are unchanged, but shank（V・H dimensions）are circumrotated 90°.Pmin・Wmin are unchanged.Applicable for tip and shank are coaxial only.V≦30 is available.Designated position of key groove・flanged type are shown in right drawings.CTC（200）CTC≦H／5CTC≦W／5（straight type）Unit of designation 0.1For straight type, tip shape D is available only.GC（400）●Process a taper on the tip.Range of designation20≦GC＜900.5×Ptan（90−GC）＜B−0.5Unit of designation 1Tip shape A is available.Combined with LKC・LKP・LKPZ are not available.Combined with HCC・HRC are not available.HCC（200）●Chamfer on the tip.Range of designation0.1≦HCC≦1Unit of designation 0.1Tip shape A is available.d1 is the ejector hole diameter.　　Combined with GC・HRC are not available.HRC（400）●Chamfer R on the tip.Range of designation0.1≦HRC≦1Unit of designation 0.1Tip shape A is available.d1 is the ejector hole diameter.　　Combined with GC・HCC are not available.VUC（0）VSC（0）Unit of designation 0.1Tip shape A is available.For head dimension alteration,HC dimension is 1.5 or fixed.　　VUC・VSC tolerances are the same as V（standard＋0.01HHC（0）HMC（0）Unit of designation 0.1Tip shape A is available.For head dimension alteration,HC dimension is 1.5 or fixed.　　HHC・HMC tolerances are the same as H（standard＋0.01Shank chamferingHWShank chamferingShank chamferingShank 90°circumrotationBottom chamferingTaper processing on the tipTip chamferingTip R chamferingV dimension alterationH dimension alterationC0.50.5 or moreC0.5C1.0CTCGCHCC±0.05HRC±0.05HHCHMCCCP0Key groove typeK90K0　0、or remain the same as VKC・VKCM・VKCZ・VNCM・VNCZ） Refer to right drawingEjector hole diameterHd1 60.7 81.1101.5131.8162.8Ejector hole diameterHd1 60.7 81.1101.5131.8162.8 above drawing above drawingF0Shoulder Held TypeSingle-flange typeF90Double-flange typeWF0WF90Tip 1.5HHCCTC207Add.Spec. Because the tip is fixed,180・270 circumrotations are not available. Refer to right table Refer to right table