PRESS2010_EN

303/1208

LG61.0300＋　T300＋　L505000＋　T　0　0－0.02 Alter tip tapered・tip acute-angle pilot punches fixed in stripper plate to→F＋0.1　0 Combined using of T dimension tolerance alterations are not available. Combined using of T dimension tolerance alterations are not available.－0.02－0.05－0.02　0　0－0.005－0.005　 ・SKC　 ・SKF●Alter the head thickness tolerance according to retainers.●Cancel press-in lead（D－0.01 －0.03）.－0.03）cancellingsehcnuP toli....3.3.ℓPー0.01ー0.0100　ーT00＋　F00＋　B3100..00＋＋T3100..00＋＋55300..00＋＋5L dimension tolerance alterationT dimension tolerance alterationT dimension tolerance alterationT dimension tolerance alterationF dimension tolerance alterationB dimension tolerance alterationKey flat tolerance alteration on the shankPress-in lead（D－0.01 Tip lappingRelief processing under the headSKC　0SKF　00.2 or less301Code@/PLKC（1,000）L＋0.05 Tip tapered・tip acute-angle type are available.TKC（200）T＋0.02TKCM（200）T　0TKC（200）T　0 Pilot punches with key groove are available.TNCM（0）T　0TKC（200）T　0 Shoulder held pilot punches are available.FKC（1,000）F＋0.05 Tip tapered・tip acute-angle type are available.BKC（400）B＋0.05 Tip tapered・tip acute-angle type are availableSKC　0SKF　0 Combined using of the following alterations are required.SKKC（400）Code@/PHead thickness alteration according to retainersRC（200） is available.NDC（0）SC（1,200）●Lap on the tip .P dimension tolerance and unit of designation are unchanged.Processing before coating.For rang of lapping, refer to drawings of lapping products. TNK（200）●Process the relief under the head.Spec.Spec. For tip tapered type,R＝0 is not available. For tip tapered type,R＝0・RT＝0 are not available F coating type is not available. Tolerance Alteration OthersAdd.（Standard tolerance）Add.Tolerance alterationRemarks