52−6PTSMM52−6SMM（1.5）CSK゜51R≦0.5●Process a 15° relief chamfering on the mounting surface along the extension line of shank to ●Alter key groove depth according to designated dimension.Range of designation0.5≦UF＜UUnit of designation0U Shape Alteration Key Groove AlterationCharacter direction：CCP180CCP27090180K180K90K0270K270462Dowel pin（accessory）alterationTip R chamferingEngraving part slantingShank chamferingRelief chamfering additionEngraving characters alterationKey groove depth designationC1.0UF＋0.2 0A145A145A145CCP90A145A145Add.Code@/PKNC（100）●Alter the straight dowel pin to tapped precision type.Alter MMS6−25→MMSTP6−25.RSC（200）●Chamfer R on the tip of embossing punches.SSPSTT・SSHSTT,PPHSTT are available.d≧1.5 is available.KSC（2,000）●Designate the slanted angle of engraving part and character direction.Range of designationSlanted angle：0＜KSC≦10Character direction：0≦K≦270（refer to right drawing）Unit of designationSlanted angle： 1Character direction： 90Add a stop flat at 0°position of shank.Combined with KC・WKC・CKC are not available.（Combined with WKF is available.）Ordering example：KKMCP10-40-A5-B-KSC10-K90.Characters are engraved upright the incline（engraving characters on punch are inverted）CCP（200）●Alter 1 corner of the shank to C1.0 chamfering.The chamfering position can be selected from the following drawings.CCP0FK（Single-flange type 200）（Double-flange type 400）flange, in order to prevent breakage caused by stress concentration. Process one relief chamfering for single-flange type, two for double-flange type.Combined with HC is available.Right table●Alter engraving characters to symbols.（700）For symbol alteration, CHR is the designated No. from the following table.No.101112131415161718192021222324252627282930Symbol＋ー±×÷＝#%〜／→↑・．、※（）「」Code@/PUF（400） 0.1Spec.Add.Spec.Guide for Punches & Button Dies for Forming Addition
元のページ ../index.html#464