ー0.01 0180°WKF0ー0.01180°0°0°0°0°0°0°0°0°D/2●Alter the standard position of flat cutting.Range of designation0＜KC＜360Unit of designation2ー2D/2●Alter key groove depth according to designated dimension.Range of designation0.5≦UF＜UUnit of designation Key Groove AlterationseD nottuB&sehcnuP depahS lacepS ii UKCWKF180°KCKC90°270°180°270°90°KC90°270°270°90°UFCode@/PKC（200） 1Combined with WKC is available.For dowel slot button dies, alter the position of dowel slot.Tapped type：D5 is not available.WKC（200）●Add parallel flats cutting.Combined with KC is available.Combined with CKC・WKF・SKC・SKF are not available.Tapped type：D5 is not available.Dowel slot button dies are not available.CKC（200）●Add two flats cutting at 0°・270°positions on the head.Combined with KC is available.Headed t ype is available.Combined with WKC・WKF・SKC・SKF are not available.WKF（400）●Add a flat cutting at the standard （0°） position and the other at designated angle.Range of designation0＜WKF＜360Unit of designation 1Headed type is available.Combined with KC・WKC・CKC・SKC・SKF are not available.Code@/PUF（400） 0.1Key groove type is available.90°180°180°270°90°KC90°180°180°90°KC270° Combined with KC270° Combined with KC270°Flat cuttingParallel flats cuttingRight-angled two flats cutting on the headDesignated-angled two flats cutting on the headKey groove depth designationPunchesButton diesPunches2ーD/2 0ー0.01Button diesPunches2ーD/2 0ー0.01Button diesPunchesButton dies539Add.Add.Spec.Spec. Flat cutting Alteration
元のページ ../index.html#541