PRESS2010_EN

558/1208

50M2.2..0.1.2....U○○○○○○○○○○○○○○○○○○P○○LMU－8○○○○○○○○○○○○○○○9　5511010102×M2≧T（0±W±0.01W±0.01W±0.01min10±P0±P0±PW 2.00～ 3.00 3.01～ 4.00 4.01～ 5.00 5.01～ 6.00 6.01～ 8.00 8.01～10.0010.01～15.0015.01～20.0020.01～25.0025.01～30.00345600　＋L00　＋L00　−T00＋　L±0.1　Key groove type）1Screw hole standardFor the screw hole dimension, refer to the shorter dimension of P・W in the left table. But for 8H・18J, refer to P dimension.Screw hole positionScrew hole is processed on the centre of each tip shape. But for 2L・3L, it is on the centre of the symmetrical max. width of tip.R≦0.3is the range of coating（surface 2700HV）F coatingTiCN SKH51 SKH40 SKD11SKH51SKH4023K25K P.1108 P.1110556Following shapes can not be processed For P（W）＜8.00, the overall length L is 40・50.　 Shape 10J・13J・5K・10K・18K are not available. For tip shape（8H・18J・2L・3L）,W dimension designation is not available, the max. width＝W.MaterialHardnessW5.01～30.0060～63HRCW2.00～30.0061～64HRCW2.00～30.00 SKH40：P/M high-speed steel（JIS G4403.2000）.64～67HRCCode No.MaterialCodeTiCNF coatingW5.01〜30.00HFーHPCHHーHPCHFーHMCHHーHMCHFーHKCHHーHKCSKD11W2.00〜30.00HFーHSPCHHーHSPCHFーHSMCHHーHSMCHFーHSKCHHーHSKCW2.00〜30.00HFーPHPCHHーPHPCHFーPHMCHHーPHMCHFーPHKCHHーPHKCStandard typeProcessing condition for tapped typeProcessing limits of tip shape and screw hole MThe minimum distance between outer diameter of screw hole and shape contour is 1Coating typeF coatingTiCNF coatingTiCNF coatingTiCNShapeTapped type40506070802H～12H2J～18J3K～29K2L～7LRelation between P・W dimensions and screw hole MShorter side of P・WM34.01～ 5.005.01～ 6.0046.01～ 8.00568.01～10.0010.01～30.008CodeTapped typeKey groove typeStandard typeHFーHPCHFーHMCHFーHKCHHーHPCHHーHMCHHーHKCHFーHSPCHFーHSMCHFーHSKCHHーHSPCHHーHSMCHHーHSKCHFーPHPCHFーPHMCHFーPHKCHHーPHPCHHーPHMCHHーPHKCTip dimension【P・W： 10.01〜15.00○ 0.01】 5.01〜10.00○2.00〜5.00○15.01〜20.0020.01〜25.0025.01〜30.00 Tip shapes P.5421.01.5Special Shaped Straight PunchesCoating（F coating・TiCN）Type