PRESS2010_EN

601/1208

D／2−0.5≦SKF≦D／2−0.1（key groove type）P≦2（SKF−0.1）Combined with KC・WKC・WKD・CKC・WKF・SKC are not available.iii PPYCYY●Chamfer on the head.Range of designation0.5≦CTC≦1.5Unit of designation●Process a taper on the tip.Range of designation20≦GC＜90●Chamfer on the tip.Range of designation0.1≦HCC≦1（punches）GCD456●Chamfer R on the tip.Range of designation0.1≦HRC≦1（punches）●Alter the length of tip tapered part.Range of designation1≦YC≦YCmaxUnit of designation4512342｛YtanGC｝＜PGGC●Add a flat cutting on the shank.●Add a designated flat cutting on the shank.Range of designation3D／10≦SKF≦D／2−0.1ー0.01ー0.01●Alter 4 corners of the shank to C0.5 chamfering.seD nottuB&sehcnuP noscerPVPHead chamferingTaper processing on the tipTip chamferingTip R chamfering Y dimension alterationKey flat cutting on the shankPunchesShank chamferingHWPunches with key grooveCTCHCC±0.05HCC±0.05HRC±0.05HRC±0.05SKC　0SKF　0C0.50.5 or moreAir hole typeFlange fixed type0.40.8Pilot punches1.000〜1.9992.000〜d10.40.50.8Ymax599Add.G dimension alterationCode@/PCTC（Steel 200）（Carbide 600） 0.1GC（Steel 400）（Carbide 1,200）0.5×Ptan（90−GC）＜B−0.5Unit of designation 0.1Combined with HCC・HRC are not available.HCC（Steel 200）（Carbide 1,600）0.3≦HCC≦1（button dies）P−2×HCC≧0.2（punches without air hole）P−2×HCC≧0.2＋d1（punches with air hole）Unit of designation 0.1Combined with GC・HRC are not available.HRC（Steel 400）（Carbide 1,800）0.3≦HRC≦1（button dies）P−2×HRC≧0.2（punches without air hole）P−2×HRC≧0.2＋d1（punches with air hole）Unit of designation 0.1Combined with GC・HCC are not available.YC（600） 0.1GC（600）●Alter the angle of tip tapered part.Range of designation5≦GC≦45Unit of designation 1SKC（Steel 600）（Carbide 1,800）SKC＝D／2−0.5P≦D−1.2Combined with KC・WKC・WKD・CKC・WKF・SKF are not available.SKF（Steel 800）（Carbide 2,400）Unit of designation 0.1CC（Headed type 600）（Straight type 800）The distance between the shank corner and the blade must be 0.5mm or longer.Spec.Punches fixed in stripper plateYmax0.500〜0.9991.000〜1.4991.500〜2.4992.500〜 Shape Alteration