（1.5）CNCmnabﾟ514ーC0.5●Add a press-in lead（V・H－0.01 V・H－0.01－0.03V・H－0.01－0.03－0.03）.－0.03）cancelling●Cancel the press-in lead（D－0.01 ●Process a 15°relief chamfering on the mounting surface along the extension line of shank tob121620●Alter the screw hole diameter.●Cancel the shank chamfering.－0.03）.600C0.5C1.0CTCCCP90CCP270CCP180 Refer to right drawingTipCTCPRECISION Guide for Punches & Button Dies AdditionShank chamferingShank chamferingBottom chamferingPress-in lead additionPress-in lead（D－0.01 Relief chamfering on the flangeScrew hole diameter alterationShank chamfering cancellingAdd.Code@/PCNC（1,200）●For straight block punches, alter 4 corners of the shank to C0.5 chamfering.Range of designation5≦CNC≦LUnit of designation 0.1Tip shape D is available.Headed type is not available.CCP（600）●Alter 1 corner of the shank to C1.0 chamfering.The positioning between chamfering part and tip⋯m＋n≧1.3. Designated chamfering position.CCP0Standard・tapped type are available.CTC（600）●Chamfer on the bottom of punches.Range of designation0.3≦CTC≦1.5CTC≦H／5CTC≦W／5（tip shape D of straight type）Unit of designation 0.1DC（600）NDC（0）FK（Single-flange type 200）（Double-flange type 400）flange, in order to prevent breakage caused by stress concentration.Process one relief chamfering for single-flange type, two for double-flange type.Combined with HC is available.MC（0） Dimensions （a・b） of steel insert brazing are unchanged.StandardAlteration MCa 6 810M4M6M8NCC（0）Spec.M3M5M6 Shape Alteration
元のページ ../index.html#602