PRESS2010_EN

651/1208

P≦HC＜H（straight punches）2.6≦P≦HC＜H（straight coating punches）4≦TC＜T（straight coating punches）3.5≦TC＜T（ejector punches）HHCCLCLLLχLTiXLCLCTCTTCVV●Reduce the overall length“L”dimension.Range of designationχ≦LC＜L　 Table 7Unit of designation●Reduce the head diameter“H”dimension.Range of designationD≦HC＜H●Reduce the head thickness“T”dimension.Range of designation2≦TC＜T 0.1sehcnuP edbraCXCLCode@/PLC（600） 0.1→Combined with LKC・LKP・LKPZ can be For the overall length LC＜χ, tip length B＝LC−χ1.　 Table 3・7Shoulder held punches.　 P.700Punches with air hole.Range of designationLC＜LUnit of designation 0.1→Combined with LKC・LKP・LKPZ can be Tip length B・air hole length S are shortened according to（L−LC）.LCX（600）●Tip length B of punches with air hole is unchanged while reducing the overall length“L”dimension.Range of designationχ≦LCX＜L　 Table 7Unit of designation 0.1→Combined with LKC・LKP・LKPZ can be For the overall length LCX＜χ, tip length B＝LCX−χ1.　 Table 3・7Air hole length S is unchanged.For punches with air hole・shank cutting punches, material V30 is not available.HC（600）Unit of designation 0.1TC（600）Unit of designation 0.1→For combined using with TKC・TKCM can be L is shortened according to（T−TC）.When combined with LC・LCX, L is equal to LC・LCX.Shoulder held punches.Range of designation13＜TC＜25Unit of designationFor the overall length L（C）＜50, TC≦20The overall length L is unchanged.VC（1,200）●Alter“V”dimension.Range of designationD4〜6 ： V−0.5≦VC≦D−1.2D8〜 ： V−2 ≦VC≦D−1.2P≦VC 0.1Unit of designationShoulder held type is available.L dimension alterationH dimension alterationT dimension alterationV dimension alterationPunches with air hole 0.01.Table 7TypeTip shape（round）25＋B（C）Tip shape （special shaped）30＋B（C）Quill punchesShort punchesTip shape of two-step punches（round）Tip shape of two-step punches（special shaped）Shoulder held punchesStraight punches15＋B（C） 0.01. 0.01. 0.01.2025＋F30＋F4020649Add.Spec. Dimension Alteration