PRESS2010_EN

652/1208

P−2×HCC≧0.2（without air hole）P−2×HCC≧0.2＋d1（with air hole）H＞5：0.5≦CTC≦1.5H≧2.6 is available.GCd1P−2×HRC≧0.2（without air hole）P−2×HRC≧0.2＋d1（with air hole）d1 is the ejector hole diameter（refer to right table）.Combined with GC・HRC are not available.ー0.40.50.8D 3 4 5 6 8101316ーDDV≦D−1.2V≦D−2.2W≦D−1.2W≦D−2.2P・W maxP≦D−1.2P≦D−2.2D≧3 is available.Combined with KC・KD・WKC・WKD・CKC・WKF・SKF are not available.Combined with NKC is not available（except for key groove type）.3〜 6D／2ー0.58〜16D／2ー1ー0.01●Add a designated key flat cutting on the shank.Range of designationP・W maxP≦2（SKF−0.1）W≦2（SKF−0.1）V≦2（SKF−0.1）ー0.01650Head chamferingTaper processing on the tipTip chamferingTip R chamferingKey flat cutting on the shankPunchesKey groove typeCTCHCC±0.05HRC±0.05SKC　0SKF　0d1 is the ejector hole diameter（refer to right table）.Combined with GC・HCC are not available.With air holeShoulder held type0.30.50.81.21.61.92.9V maxV maxSpecial shapedTwo-step punchesAdd.Code@/PCTC（600）●Chamfer on the head.Range of designationH≦5：CTC＝0.5Unit of designation 0.1GC（1,200）●Process a taper on the tip.Range of designation20≦GC＜900.5×Ptan（90−GC）＜B−0.5Unit of designation 1Combined with LKC・LKP・LKPZ are not available.Combined with HCC・HRC are not available.HCC（1,600）●Chamfer on the tip.Range of designation0.1≦HCC≦1Unit of designation 0.1HRC（2,000）●Chamfer R on the tip.Range of designation0.1≦HRC≦1Unit of designation 0.1SKC（1,800）●Add a key flat cutting on the shank.SKCSKF（2,400）（Shank cutting type 600）TypePunches3〜16Key groove typeWith air holeUnit of designationCombined with KC・KD・WKC・WKD・CKC・WKF・SKC are not available.Combined with NKC is not available（except for key groove type）.Express is not available.Spec.RoundSpecial shapedTwo-step punchesSKFminmaxRound3D／10D／2ー0.13〜 6D／2−0.5D／2ー0.18〜16D／2−1.0D／2ー0.1 0.1 Shape AlterationGuide for Carbide Punches Addition