PRESS2010_EN

725/1208

LG51LG80.08020500P・W dimension tolerances alteration　0 Combined using of P・W dimension tolerance alterations are not available　0　0　0 Combined using of L dimension tolerance alteration are not available Combined using of T dimension tolerance alteration are not availableT＋0.05　0H＋0.005　0　0－0.02－0.003V・H dimension tolerances alterationd2H2.1 52.6 6 83.410～4.4Outer diameter designated typed25.0～ 6.02.66.1～ 8.03.48.1～10.04.4Straight type－0.005●Alter key groove depth according to designated dimension.Range of designation0.5≦UF≦U＋0.2 Combined using of V・H dimension tolerance alterations are not available Key Groove Alterationd22ーU（F）d25.00～6.002.66.01～8.003.48.01～4.4H（W）－UF≧2V（P）－UF≧2H（W）／2－UF－d2／2≧0.5V（P）／2－UF－d2／2≧0.5 （W）（P）are for straight punches.H（W）－（2×U（F））≧2V（P）－（2×U（F））≧2H（W）／2－UF－d2／2≧0.5V（P）／2－UF－d2／2≧0.5 （W）（P）are for straight punches.X≧2X≧2sehcnuPkcoB edbraC..2.2.－－..XUUXX.0GliHWG3100＋＋L00＋　T00＋　T00　ーT00＋　V1.61.6L dimension tolerance alterationT dimension tolerance alterationT dimension tolerance alterationKey groove depth designationSymmetrical key groove additionTip effective part lappingP,W＋0.01UFUF723Code@/PPKC（2,300）P,W＋0.005　0PKCM（2,300）P,W　0－0.005PKCZ（2,300）P,W±0.002PNCM（0）P,W　0－0.01PNCZ（0）P,W±0.005LKC（1,200）L＋0.05LKP（1,800）L＋0.01LKPZ（1,800）L±0.005TKC（1,200）T＋0.02 Flanged type is available.TKCM（1,200）T　0RTC（0） Key groove type is available.VKC（2,000）V,H＋0.003VKCM（2,000）V,H　0 Block punches・blanks are available. V＝P or H＝W are not available.VNCM（1,200）V,H　0VNCZ（1,200）V,H±0.002Code@/PUF（600）For K0,K180For K90,K270X≧0.5For K0,K180（Air hole type）For K90,K270Unit of designation 0.1WK（800）●Process a symmetrical key groove.For K0,K180For K90,K270X≧d2＋1For K0,K180（Air hole type）For K90,K270Code@/PSC（1,200）● Lap tip effective part. For straight type, the range of lapping is shown in right drawing.Spec.Spec.Spec. Tolerance Alteration OthersAdd.（standard tolerance）Add.Add.Tolerance alterationRemarks