PRESS2010_EN

828/1208

CBCLCLBLLT11BLBWPCT●Alter the shaped hole B dimension.Range of designation0≦BC≦4Unit of designation●Reduce the overall length“L”dimension.Range of designation10≦LC＜LUnit of designation●Reduce the flange width.Range of designation0≦HC＜1.5Unit of designation●Reduce the flange thickness“T”dimension.Range of designation2≦TC＜5Unit of designation Drawing 3 Drawing 1K（angle of blanking hole）≦5 （K=tan−1｛（ANC−P）／2（L−B）｝）　 Drawing 1 Drawing 2B≦（P−0.6）／tanK　（round） 　　　 　 B≦（W−0.6）／tanK （special shaped）　 Drawing 2P・WK（angle of blanking hole）AN（standard dimension of blanking hole）ANC（designated dimension of blanking hole）●Shaped hole （P・W dimensions） are unchanged, but shank （V・H dimensions） are circumrotated 90°.WVWHVPHPCode@/PBC（900） 0.1LC（600） 0.1→Combined with LKC・LKP can be For single-flange type, LC≦12, no press-in lead.HC（600） 0.1TC（600） 0.1→Combined with TKC・TKCM can be L is shortened according to（5−TC）. When LC is applied, L is equal to LC.Code@/PANC（600）●Alter the blanking hole of angular button dies according to designated dimension.Range of designationAN＜ANC≦P＋4≦Pmax　　（AN＝P＋（L−B）／50）　　　　 　 Unit of designation 0.1Alter AN to ANC within the range of PCmax by 1/50 taper increment.Angle（K）of blanking hole is 5°max. The distance between shaped hole length B and wire is 0.6mm min. For special shaped hole, entire processing was applied according to the blanking hole angle K calculated from P dimension and ANC dimension.　　Drawing 3Drawing 1PHVC（0）The processing range of P dimension is W dimension in standard table.SRC（1,800）●Add slanted grooves （N） .Range of designation4≦N≦6Processing position　360°／N.For round type, P≧4.00 is available.For N＝4, refer to left drawing.826B dimension alterationL dimension alterationFlange width alterationT dimension alterationBlanking hole dimension alterationShank 90°circumrotationSlanted grooves additionHC1.550ANC120°90°50Drawing 2 0.01.0.6 or moreShapeWireAdd. For details, refer to the specific page please. Shape AlterationAdd.Spec. 0.01.Spec. Dimension AlterationGuide for Carbide Block Dies Addition