PRESS2010_EN

984/1208

trap tif-sserPtrap gndil＋0.002　0＋0.003　0－0.003－0.005－0.003－0.006－0.003－0.008＋0.002　0　0ー0.002＋0.003　0　0ー0.003m5　0ー0.0052μm3μm5μmφ0.01φ0.005φ0.008※1 The clearance is one side value between pin and bushing. Tolerance alteration （DKC） is available for 2 types of precision guide pins.（Headed・straight type）※2 （　） is for removable typeStripper guide pins　Product overviewHeaded type2μm3μm5μmiSーーーーーーーーーーーーーーーーーーーーーーー ーー（kgf/cm2）（kgf）4,2148,4639,5198,687Compression shear force is the average value of 2 tests. Divide the compression shear force by acreage of interface to get the compression shear strength.Plate material：S50C, Clearance：0.02mm, Degreasing：yes, Curing condition：23℃×72 hoursCompression test machine：SHIMADZU AG-IS lookN （Extracting rate：10mm/min）Adhesive982PrecisionPrecision2μm3μm5μmGuide for Precisions of Stripper Guide Pins・BushingsStripper guide bushings　Product overviewPrecisionPrecisionPrecisionPrecision P.1000 P.1000PrecisionSliding partSurface RoughnessTolerance ※1Roundnessー0.010ー0.012ー0.007ー0.009ー0.010ー0.013ー0.010ー0.015MaterialCarbideWWVGPH P.983VVGPHSKD11 P.984TTGPH P.988SSGPH P.993HHーSGPH P.992SUJ2SUJ2SUJ2Hard chrome platingAdhesive typeSUJ2Straight typeHeaded typeVVGBHVVGBL P.986 P.986TTGBTTTGBL P.990 P.990SSGBTSSGBL P.998 P.998Ball cage-integrated typePress-fitThick・adhesiveStraight typeStraight typeHeaded typeStraight typeStraight typeHeaded type5μmSSGBBSSGBBLSSGBBFSSGBBWSSGBBSSSGBBH P.1000How to mount stripper guide bushings （adhesive type）Mount the bushing with adhesive for fitting. 0.02〜0.03mm clearance between bushing and mounting hole （one side） is required. According to different materials, refer to the result of compression test （Table below）（ P.1001）How to mount stripper guide bushings （press-fit type）For recommended press-fit allowances, refer to the right table. In order to prevent demounting, press-fit allowance for straight type should be larger than headed type. Press fitting will shrink the inside diameter of bushing, pay attention to the allowance during processing the mounting hole.Test result of fixed compression shear strength of guide bushings with adhesiveBushing materialFitting clearanceCode No.SUJ2FC250CAC304YesNoYesNo0.0015Ra0.10.0015Ra0.150.002Ra0.2VVGBL20－25SSGBL20－25SSGBZ20－25SGSFG20－25Guide pinPress-fit partTolerance ※2RoundnessSurface RoughnessStraight typeWith press-fit partWith oil grooveWith oil grooveOil typeCopper alloyStraight typeHeaded typeVSGSFGVSGBFG P.986 P.986TGBFGTGSFG P.990 P.990SGBFGSGSFG P.998 P.998For ball bearingStraight typeHeaded typeSUJ2Thick・adhesiveAdhesiveAdhesive　LLOC-638Compression shear forceCompression shear strength0.0015Ra0.2φ0.0030.0015Ra1.6φ0.0030.002Ra1.6φ0.005WWVGPN P.983VVGPN P.984TTGPN P.988SSGPN P.994HHーSGPN P.992SSGOH P.993ーSSGON P.994ーSSGBA P.998 P.1000 P.1000 P.10001～2CoaxialityClearance3－1※1IDToleranceRoundnessSurface RoughnessToleranceRoundnessRa0.1Removable typeWith press-in leadWith oil groovePress-fit typeSUJ2FC250Straight typeHeaded typeVVGHZVVGBZ P.986 P.986TTGHZTTGBZ P.990 P.990SSGBZSSGHZ P.999 P.999TypeOil type0.00250.00450.0010.0030.0020.0050.0010.0060.00150.0015Ra0.20.002Ra0.2WWVGPS P.983VVGPS P.984ーVVGPR P.985TTGPR P.989SSGPR P.995ーSSGOR P.995ーSSGBH P.998215431433395Oil-free TypeRa0.2Guide bushingODSurface RoughnessRa0.2High rigidity typeBoth ends tapped typeStraight typeHeaded typeOil-free typeAdhesive typeCopper alloyStraight typeHeaded typeVSGCZGVSGFZG P.987 P.987TGFZGTGCZG P.991 P.991SGFZGSGCZG P.999 P.999CodeSSGBASSGBHSSGBBRecommended press-fit rangeStraight typeHeaded typeBall Bearing CagesStraight typeh4LoadExtracting jigBushing0.00150.002Ra1.6SSGPWSSGPWSSSGPWH P.995ー0.008〜0.0100.003〜0.0050.006〜0.008Copper alloy typeOil-free TypeRa1.60.002Ra1.63～4Coaxiality P.994ー P.995ーGuide for Stripper Guide Pins・Bushings